To join this course you must have been a Certified Welding Inspector for a minimum of 2 years with job responsibilities in the areas listed in 1.2.1, 1.2.2 and 1.2.3 of CSWIP document WI-6-92. Alternatively, you should have 5 years' authenticated experience related to the duties and responsibilities listed in Clause 1.2.3 of CSWIP document WI-6. Certified Visual Welding Inspector for a minimum of 2 years with job responsibilities in the areas listed in 1.2.1 and 1.2.2 of CSWIP document WI-6-92 OR; Welding Instructor or Welding Foreman/Supervisor for a minimum of one year; In addition to all the above, candidates must comply with Clause 1.3.4 of document WI-6-92 available at www.cswip.com.
- Welding Inspector Level 2 Exam Questions
- Welding Inspector Qualifications
- Certified Welding Inspector Courses
- Welding Inspector Job
- Welding Inspector Level 2 Exam Paper
The welding inspector plays an important part in checking that all welding meets the appropriate standard. Weld Australia offers 2 internationally recognised courses and 2 nationally recognised courses:
International Welding Inspector Basic (IWI B)
Structure: 5 day Welding Inspection Module
Entry Requirements
Training Pathway 1: IIW IWP, National or State Certificate in Engineering (or related discipline) or equivalent such as Cert III (Aust.) in Engineering
Training Pathway 2: “Professional worker”
Training Pathway 1: IIW IWP, National or State Certificate in Engineering (or related discipline) or equivalent such as Cert III (Aust.) in Engineering
Training Pathway 2: “Professional worker”
Qualification: IIW International Welding Inspector Basic Diploma
Certification: Weld Australia Certified Welding Inspector (CWI)
Certification: Weld Australia Certified Welding Inspector (CWI)
International Welding Inspector Standard (IWI S)
Structure: 8-day Welding Inspection course delivered in 2 parts. Part 1 – five days, Part 2 – three days
Entry Requirements
Training Pathway 1: IIW International Welding Specialist (IWS) Diploma
Training pathway 2: AS 1796 Certificate 10 and/or AS 2214 Welding Supervisor
Training Pathway 3: Weld Australia Certified Welding Inspector (CWI) or IWIB plus 24 months experience as an IWIB or other national welding inspector certifications such as CBIP Welding Inspector, SAIW Level 1, AWS Certified Welding Inspector
Training Pathway 1: IIW International Welding Specialist (IWS) Diploma
Training pathway 2: AS 1796 Certificate 10 and/or AS 2214 Welding Supervisor
Training Pathway 3: Weld Australia Certified Welding Inspector (CWI) or IWIB plus 24 months experience as an IWIB or other national welding inspector certifications such as CBIP Welding Inspector, SAIW Level 1, AWS Certified Welding Inspector
Qualification: IIW International Welding Inspector Standard (IWI S) Diploma
Certification: Weld Australia Certified Senior Welding Inspector (CSWI
Certification: Weld Australia Certified Senior Welding Inspector (CSWI
Weld Australia Welding Inspector Grade 1
![Saiw Saiw](/uploads/1/1/4/0/114090865/735484110.png)
Structure: Blended Learning Course comprising of online, distance and face-to-face learning.
Entry Requirements
Option A
One or more of the following:
- Certificate III in Engineering Fabrication;
- Engineering Tradesperson;
- Trade qualified (welding related);
- Trade qualified Fitter and Turner or Fitting and Machining Trade prior to 1992;
- AS 1796 Certificate Number 10;
- AS 2214 Welding Supervisor;
- Trade qualified in Sheet Metal Trade;
- Relevant overseas qualification (eg. CSWIP); or
- Diploma or higher tertiary qualification in Engineering or Engineering-related discipline.
PLUS, two years verified practical experience in welding or fabrication, subsequent to gaining one of the above qualifications.
Option B
At least six years work experience in a metal working profession to satisfy the Qualification and Certification Board that you have the requisite knowledge.
To confirm your eligibility, you will need to supply:
At least six years work experience in a metal working profession to satisfy the Qualification and Certification Board that you have the requisite knowledge.
To confirm your eligibility, you will need to supply:
- Certified copies of qualifications and transcripts; and
- Resume detailing your welding experience.
Qualification: Weld Australia Welding Inspector Grade 1
Weld Australia Welding Inspector Grade 2
Structure: Blended Learning Course comprising of online, distance and face-to-face learning.
Entry Requirements
Entrants should satisfy the requirements of either A or B or C below:
A.
The applicant would need to provide documentary evidence of one or more of the following:
- Certificate III in Engineering Fabrication;
- Engineering Tradesperson;
- Trade qualified (welding related) i.e. Boilermaker, Fabricator, Welder;
- Trade qualified Fitter and Turner prior to 1992;
- Trade qualified Fitting and Machining Trade prior to 1992;
- AS 1796 Certificate Number 10;
- AS 2214 Welding Supervisor;
- Trade qualified in Sheet Metal Trade;
- Relevant overseas qualification e.g. CSWIP 3.1 or CSWIP 3.2; CBIP; etc.;
- Diploma or higher tertiary qualification in Engineering or Engineering-related discipline.
AND
Four (4) years verified current practical experience in the welding or fabrication industry subsequent to gaining one of the above qualifications, one year of which must have been as a supervisor and/or inspector. People in Category A will need to complete the Weld Australia Welding Inspector Grade 1.
OR
B.
Hold the Weld Australia Welding Inspector Grade 1 and two (2) years verified current practical experience in the welding or fabrication industry subsequent to gaining one of the above qualifications, one year of which must have been as a supervisor and/or inspector.
OR
C.
Have verified relevant work experience in the metal working profession of at least eight (8) years to satisfy the Qualification and Certification Board that they meet the knowledge requirements. People in Category C will need to complete the Weld Australia Welding Inspector Grade 1.
All participants should have literacy and numeracy levels sufficient to interpret complex documents, prepare written reports and prepare industry required documentation in English.
The art of welding involves joining two metals using heat, and requires specialized training and skill. Welding, an integral part of our lives, can be seen in many items we use every day -- computers and cars, for example. Certified welding inspectors assure that welders adhere to strict guidelines and safety rules that keep both the welder and the end user safe. The American Welding Society offers the only certified welding inspector certification. The path to becoming a certified welding inspector follows several steps.
Step 1
Send in your certified welding inspector application form. Applicants must mail the form, found on the AWS website, at least six weeks prior to taking the exam. The application fee of $850 for AWS members and $1,065 for non-members must be included with the application. The application also requires applicants to choose a code test subject, which is the type of welding they plan to specialize in for inspections.
Step 2
Choose your exam site. On the application, applicants should indicate their first, second and third choice for exam locations. AWS gives the exams throughout the year at cities throughout the country. After confirming the exam site through AWS, applicants can then make travel and hotel arrangements.
Welding Inspector Level 2 Exam Questions
Step 3
Fulfill education and work experience requirements. The number of years needed working as a welder depends on the level of education completed. Potential welding inspectors who hold an associate degree or higher need three years' experience, a high school education requires five years, at least an eighth-grade education needs nine years and anything below eighth grade needs 12 years of work experience.
Step 4
Complete welding inspector training. Though not a requirement, welding inspector training helps prepare welders to pass the AWS exam. Vocational, technical and welding schools offer welding inspector classes that help prepare students to take the AWS certified welding inspector exam. AWS offers five-day seminars that help prepare applicants for the exam, and include the exam on the last day. Training classes cover topics such as code enforcement, application of documents governing welding inspection and qualification, safe welding practices, inspection documentation and destructive testing. Training classes also typically include a hands-on portion that allows students to use inspection tools.
Step 5
Pass the AWS certified welding inspector exam and a vision test. The exam consists of three parts, and students must receive a grade of 72 percent or better to pass. Welding inspectors must pass the initial vision test to earn certification, and must also pass a vision test each time they renew. The test consists of three two-hour portions, including the 150-question fundamentals of welding inspection portion, a practical application section where test takers perform hands-on inspections and an open-book code application test. Welding inspectors need to be familiar with all the topics covered in the training classes to pass the exam.
![Welding inspector level 2 salary in south africa Welding inspector level 2 salary in south africa](/uploads/1/1/4/0/114090865/315180163.jpg)
Step 6
Renew your certification every three years. AWS requires that all certified welding inspectors submit a notarized renewal application and the renewal fee of $445 for AWS members or $660 for nonmembers. AWS does not require renewals to take any tests except the vision test, and there are no continuing education requirements.
Tips
- Becoming certified as a welding inspector is not necessary to work in the field, but does make an inspector more marketable to potential employees.
- AWS offers certified associate welding inspector certification for welding inspectors who wish to gain additional experience before attempting the welding inspector certification process. A certified associate works with a certified welding inspector for three years, learning the knowledge and skills to pass the certified welding inspector exam. Certified associate welding inspectors learn about code enforcement, inspection terminology and visual inspection, and get a chance to work hands-on with welding inspection tools, under the guidance of a certified welding inspector.
Certified Associate Welding Inspector (CAWI)
Marina abramovic the space between. Certified associate welding inspector (CAWI) candidates must pass a written and practical test. Topics covered on the test include welding processes, quality assurance and mathematics. Candidates need at least two years of experience in a welding-related job. Certified associate welding inspectors can only hold their level of certification for three years, after which they may take the test to qualify for the certified welding inspector credential. CAWI certification is not eligible for renewal.
How to Become a Welding Inspector: Step-by-Step Career Guide
Learn how to become a welding inspector. Research the education requirements, training information, and experience required for starting a career in the welding field.
Should I Become a Welding Inspector?
Welding inspectors examine the connections and bonds between metals. Inspectors use visual tools and electrical instruments to check and ensure the quality and safety of connections.
Career Requirements
Sources: American Welding Society, Job listings accessed during December 2012, PayScale.com (July 2015)
Step 1: Earn a Postsecondary Education
Formal training through a community college or vocational school isn't required, but some employers seek welding inspectors with postsecondary education. Technical programs in welding typically last 1-2 years and result in a welding diploma or certificate. Topics generally include blueprint reading, metallurgy, fabrication and arc welding. Students might also consider 2-year associate's degree programs in welding technology. These programs often include general education coursework as well as welding-specific classes in arc, gas tungsten arc and pipe welding.
Success Tip:
- Bolster related skills. Skills in creating objects and designing diagrams can be developed in courses like mathematics, wood or metal shop and drafting. Welding inspectors must use mathematics in calculations to determine the strength of the weld as well as drafting skills to examine and evaluate other welders' designs.
Step 2: Gain Work Experience
Welding Inspector Qualifications
Welders work in a variety of industries, including construction, aerospace and machinery manufacturing. Before moving into the role of inspector, welders might perform entry-level work, such as cleaning and degreasing parts, checking angles and dimensions for accuracy, inspecting equipment and mixing and applying protective coatings.
As new hires gain experience, they might advance to reading blueprints and using their knowledge and skills in metallurgy and welding to join, bind and fuse two or more metals together. Skilled welders might move on to even more complex tasks, such as welding difficult angles or materials, like titanium or steel. Advanced welders can also develop templates and models, estimate parts and labor costs and examine work for defects. Promotion to welding inspector could include duties like writing inspection reports, ensuring that equipment complies with engineering, welding and testing standards and training other welding staff.
Success Tip:
Certified Welding Inspector Courses
- Participate in an apprenticeship or internship. Completion of an internship is one way to gain experience in the welding field. Some unions will assist aspiring welders in securing internships.
Step 3: Pass Welding Inspector Certification Exam
Welders who have attained a postsecondary certificate, diploma or degree and completed 3-4 years of documented work experience may apply to become Certified Welding Inspectors (CWIs) from the American Welding Society (AWS). The certification exam covers three areas, including welding fundamentals, practical applications and welding code application. Certifications generally last three years; however, CWIs can take additional exams or courses in order to prolong recertification for up to nine years.
Success Tip:
- Consider attaining endorsements. CWIs also can earn supplemental inspection credentials. While not required, these endorsements might allow CWIs to execute inspections that might have been excluded due to customer or jurisdictional requirements, such as inspections of bridges and railroads. Upon passage of a qualifying codebook exam, inspectors are given a separate endorsement card and certificate of completion.
Welding Inspector Job
In addition to working in the field completing their examinations of welding projects, inspectors spend time in an office setting compiling their reports. The majority of inspectors work on a full-time basis, primarily during business workdays. Some risk may be associated with this profession; welding inspectors utilize protective gear during their evaluations to keep themselves from harm on welding sites.
Welding Inspector Level 2 Exam Paper
Certified Welding Inspector (CWI)
Like the CAWI certification, the CWI requires individuals to successfully complete a written and practical test. The practical test includes plastic replicas of welds, inspection tools and a codebook. The first knowledge test is a closed-book 150-question exam, while the second knowledge test, taken after the practical exam, is a 46-60 question test in a welding specialization chosen by the applicant. Certification must generally be renewed every three years.
Senior Certified Welding Inspector (SCWI)
Senior certification for welding inspectors calls for at least six years as a CWI and a minimum of 15 years in a welding-related profession. Candidates must pass an eye examination and written test. Certification must be renewed every three years. A 9-year recertification cycle is available for CWIs and SCWIs by examination or by completing continuing education courses.
fine :)